Modificado en: Lun, 11 Abr, 2022 at 8:40 A. M.
To register a sensor (motion / siren / universal / door / window / climate / button / water) or actuator (base / smoke / thermostat / plug / camera) to your elements base, proceed as follows:
- open the elements app
- click on the 3 horizontal stripes in the upper left corner
- click on [Elements]
- click on the orange [+] button in the bottom right corner
- click on the actuator you want to register or on "All other sensors" to register a sensor
- follow the instructions in the elements app
When registering a sensor or actuator, it is important that it is no more than one metre away from the base. After registration, the sensor or actuator can then be placed in the desired location.