Gigaset Smart Home
1. After you have connected the Camera 2.0, please wait until the status LED above the camera lens flashes in the cycle "short, short, long" and o...
Вт, 20 Дек, 2022 на 11:11 AM
The Gigaset Smart Home system requires an existing Internet connection and a connection to the elements cloud. The signals from the Gigaset sensors are ...
Вт, 5 Апр, 2022 на 11:43 AM
Factory Reset Switch on the base with the button pressed (plug in the power cable) and keep the button pressed for 10 seconds. - All sensors are now lo...
Ср, 19 Окт, 2022 на 11:50 AM
Factory reset If the Elements Camera is already logged into an Elements account and registered in the elements app, it is absolutely necessary (for a compl...
Вт, 18 Окт, 2022 на 3:30 PM
To be able to register your Gigaset smart camera, please check the following points: Please make sure that you have a visible WLAN network. The camera sh...
Пт, 1 Апр, 2022 на 10:24 AM
It is important that the Gigaset climate is combined with the Gigaset thermostats in the room. This means the following: When you log in to the elements...
Пт, 1 Апр, 2022 на 12:28 PM
ATTENTION: Before you start logging in the thermostat, batteries must not yet be inserted. (after the batteries have been inserted, the thermostat goes int...
Ср, 12 Окт, 2022 на 2:05 PM
The elements app is currently available in the following languages: German, English, French, Italian, Dutch, Swedish and Czech. The language in the eleme...
Пн, 4 Апр, 2022 на 1:44 PM
1. Via the elements app Open the elements app Click on the 3 horizontal stripes in the upper left corner Click on [Plugs] Click on the smart-plug you w...
Ср, 19 Окт, 2022 на 2:18 PM