"Base" or "Register" flashing on the screen

If the info "Base" or "Login" is visible and flashing in the display of your Gigaset handset, this handset is currently not connected to your base station.

To reconnect the handset to your Gigaset base station, please perform the following procedure:  

- Press Menu

- Select "Settings" and confirm

- Select "Registration" and confirm with "OK"

- Confirm the item "Register HS" with "OK"

- Enter the system PIN (by default 0000) and confirm with "OK"


If you do not want to register your Gigaset handset with a Gigaset base station, first prepare the desired base according to the manufacturer's instructions. The following steps only describe the registration procedure for a Gigaset handset on a Gigaset base station.

Press the registration/paging key on the Gigaset base station for at least 5 seconds to initiate the registration process. After successful registration, the handset is automatically assigned the first free internal number.

The connection setup is aborted after 60 seconds for security reasons. If the handset has not been registered during this time, please repeat the procedure.

If this procedure is not successful, please perform a basic reset of your Gigaset phone.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article